Saturday, November 17, 2018

BlackFriday 2018 Legacy Industrial Promo Code Promotional Event

Here it is:

Howdy All!!
Happy to announce (3) promotions for Black Friday!!!
This promotion starts on Black Friday and runs through Cyber-Monday.

# 1. All orders placed on Black Friday will receive a promotional insulated lunch-tote.

#2. HellFire Concrete Coating is being re-released and will go live on BlackFriday!! Much better UV resistance, better coloration and this a cold-weather coating! 10% off with this code: blackfriday18

#3. Nohr-S Kits (Pigmented, Full Flake and Clear) also a cold-weather coating system when using our Cold Weather Primer option!!  
10% off with this code: blackfriday18

No combination offers and rebates are not available on previously placed orders.

Thanks for your continued patronage and Happy Thanksgiving!!

(secret!  shhhh!, the code works on all garage coating kits!!)

Wednesday, October 3, 2018

SEC Sealer Concrete Garage Floor Hobby Shop Clear Coating

Want the polished concrete look?  Want it without the heavy price tag?  Look at the Legacy Industrial's SEC SEALER.  -CLICK FOR LINK-


Sunday, September 9, 2018

Nohr-S Polyurea VS. Epoxy Garage Floor Coating

WOW!! We receive this question 2-3 times per day.  Why should I use Legacy Industrial's Nohr-S Polyurea VS Epoxy?  Let's start with the basics!

Nohr-S Polyurea is a high performing SINGLE PART (no mixing) concrete floor coating.  It is derived from a similar coating used to coat MARINE STRUCTURES used in Ocean Service!! It's important to mention Ocean Service as coatings used for Ocean duty serve in an intolerable environment.  Any coating being used in the World's Oceans needs to be really tough!  Nohr-S Polyurea is from the URETHANE family of products.  Urethanes share the highest level of wear and chemical resistance in the coating world.  Other urethanes include: Polyaspartics and Polyurethanes.

Epoxy is a VAGUE TERM!!  Epoxy on the LOW END could be the materials sold by Big-Box Stores.  These products are not really epoxy.  They are highly fortified pigmented acrylics in many cases.  Pigmented Acrylics won't be affected by UV but are not tolerant to abuse and will not hold up to vehicle traffic, very well,  in many cases.  Just because an epoxy is a 2 part, does not mean it's heavy-duty!!

On the high end, Epoxy can mean 100% solids like Legacy's SD Epoxy.  This and similar products are very high build, high gloss heavy-duty coatings.  They are very useful when trying to achieve a smooth/luxurious or heavy-duty floor.  Legacy's SD Epoxy when coupled with a urethane (Polyaspartic, Polyurea, Polyurethane) topcoat makes a very formidable system but still vulnerable to UV light produced by an open garage door facing East or West and also 2 part.

Here is the Secret-Sauce, the answer you have been waiting for!!!!!!!

ANSWER: Most people buy Nohr-S Polyurea because it is EASY!! There you go.  In addition to being easy to install it is very chem and wear resistant and of course completely UV Stable.





Thursday, August 30, 2018

Legacy Industrial Epoxy Polyurea Garage Coating Kit Discount Code 2018 Labor Day Sale

We will have a Labor Day Promotion starting Friday Aug 31 2018
Ending on Monday September 3rd, 12:00PM EST. 2018
Here are the details:

10% Discount on all orders for Garage Coating Kits
Including: 
HD Epoxy Kits (best value!)
SD Epoxy Kits
Nohr-S Polyurea Pigmented (most popular)
Nohr-S Polyurea Clear (great over DeltaDye Stain!)
Nohr-S Full Flake (unmatched durability)
Metallic Epoxy Kits 


New Orders only, no rain-checks or rebates
Not valid on Quoted Projects or Reseller Pricing
No Cash Value

The coupon code for the sale is: 
laborday2018


Thank you all for your patronage and Happy Labor Day!! 


LINK to our Garage Kits.  -CLICK HERE-

Wednesday, August 8, 2018

Hot Tire Lift, Bubbling, Sticky Floor and other reasons why your garage coating failed!!

Wow!! It feels good to be slapping this keyboard and talking directly to our customers and guests about garage floor coatings!!

When you have passion for your work and the desire to help people solve issues you aren't working people you are ENJOYING LIFE!!

Ok, quick summary... Going to give you (3) Epoxy, Urethane or Polyaspartic Floor Coating Issues and the reasons why they happen!!  Also.... remember.... Nohr-S Polyurea by Legacy Industrial limits some of these issues so go take a look!
Here we go...


  1. Hot Tire Lift (translation: POOR SURFACE PREPARATION)
    1. Concrete was not made porous enough to allow the coating to bond to the slab
      1. May have to look in the mirror, the guy you see failed you
    2. Hot Tires don't lift coatings, they encourage poorly adhered coatings to leave
    3. The only hot tires that actually are hot enough to hurt coatings are Fire-Truck Tires
      1. We use special systems for these type floors, but still use epoxy
    4. Weak concrete can also allow the tire to take the coating, this is irreversible
      1. Call your mason if this happens, it's his fault, not the coating installer
      2. Place mats under your tires, there may not be another solution
  2. Bubbling Coatings
    1. Too Much Air
      1. Don't mix coatings like cake-batter, slow and steady
    2. Too Hot 
      1. Climbing temps can release moisture from the slab
      2. Descending temps are better
    3. Too Sunny
      1. Direct sunlight beating on a curing coating causes an early-skin
      2. The early-skin traps gasses from leaving during cure
    4. Moisture
      1. Resinous coatings and moisture are not friends 
        1. WB coatings are the exception
        2. Test for moisture
        3. Hedge your bets and choose: AquaDike MVB as your primer
    5. Excessive Air Movement
      1. Fast moving air on the surface can cause an early-skin, see 3.2
  3. Sticky Floor
    1. Remember the guy in the mirror?



  • He did not mix long enough (3 mins is universal time)

    1. He did not mix with a proper wand and low-speed drill
    2. He did not scrape the bucket sides while mixing
    3. He altered the A:B ratio, BAD!!! 
    4. He coated on too cold of a day
    5. He might be scraping if not properly cured in a few days
    6. He is handsome but don't let him near our coatings, please!!

    Sunday, June 24, 2018

    DeltaDye Concrete Stain is the Best Stain for Concrete Garage?

    Looking for a Concrete Stain that is NOT ACID STAIN, holds up well to UV light and can be used interior or exterior?

    Well, Legacy Industrial's DeltaDye Concrete Stain is the ticket.  So many pleasing attributes, it's hard to beat!


    1. UV Resistant 
    2. Water Soluble
    3. Safe!  No Acid to Burn you or loved ones!
    4. Sealable using any Legacy Industrial's clear sealer
    5. Interior or Exterior Use


    How about some nice pics from our customers?







    Monday, April 23, 2018

    Equipo de preparación de epoxi y hormigón para exportación a través de Miami

    Los propietarios de las fábricas y los contratistas de pisos estarán encantados de saber que Legacy Industrial ahora está enviando los siguientes artículos:

    Equipo de molienda de hormigón
    Herramientas de diamante de molienda de hormigón
    Epoxy
    Uretano
    Grietas / rellenos de juntas

    Envío a Miami para su exportación a los siguientes países:

    República Dominicana
    Panamá
    Cuba
    Brasil
    Islas Turcas y Caicos
    Jamaica
    Puerto Rico
    Curacao

    Llame al 888-652-0333 o envíe un correo electrónico a [email protected]
    www.legacyindustrial.net





    Factory owners and flooring contractors will be pleased to know the Legacy Industrial is now shipping the following items:


    • Concrete Grinding Equipment
    • Concrete Grinding Diamond Tools
    • Epoxy
    • Urethane
    • Crack/Joint Fillers


    Shipping to Miami for exportation to the following countries:


    • Dominican Republic
    • Panama
    • Brazil
    • Cuba
    • Turks and Caicos
    • Jamaica
    • Puerto Rico
    • Curacao


    Call 888-652-0333 or email [email protected]
    www.legacyindustrial.net


    Thursday, March 22, 2018

    Nohr-S Polyurea Garage Coating Kit Spring Promotion Code!

    Here is the code, promotion ending April 1 2018!

    code: nohr2018


    Thursday, February 22, 2018

    Diamond Grinder Tooling Saving Money Best Kept Secret

    Many times contractors have to rent diamond grinders in Florida or other states.  The best kept secret when renting these units like Edco, Blastrac Turbo Grinder or Legacy Industrial SD Grinder units is very simple...
    Legacy Industrial SD Grinder "Blue Devil"


    Go ahead rent the unit from your local rental house or National Rental company like Hertz, United or SunBelt Rental.  Be sure to account for dust collection as OSHA has set new standards when creating silica dust!!

    Dustless HEPA Vac


    The best kept secret!!

    The rental house pays a fortune in Diamond Tooling costs.  Rental houses HATE to buy and stock consumables.  When an item has teeth, chains or blades that constantly need to be repaired/replaced they pass along the cost (cost plus) to the consumer.  Yes, they charge you full replacement cost of the grinding tools by the day!  Yes, by the day!  It is practically criminal act.  Here is what you can do about it.
    EDCO MAGNA TRAP PCD CHIP TOOL



    1. Find out the type of machine you will rent
    2. Get the make/model
    3. Research the type of diamond tools/teeth you will need
    4. Contact an online vendor and source these tools/teeth yourself
    5. Now! Only rent the machine, not the tools/teeth


    You will save yourself and maybe your company a fortune!  --CLICK HERE--